Journal of Applied and Computational Mechanics

Keyword Index

A

  • Accuracy Reduction in Space for Dynamic Finite Element Analysis of Assemblies of Beam-columns when the Mass is Available in Digitized Format [Volume 8, Issue 1, 2022, Pages 71-83]
  • Adomian Decomposition Method‎ Thermal Analysis of Radiating Film Flow of Sodium Alginate ‎using MWCNT Nanoparticles ‎ [Volume 8, Issue 1, 2022, Pages 219-231]
  • Air distribution patterns Optimization of Air Distribution Patterns by Arrangements of ‎Air Inlets and Outlets: Case Study of an Operating Room [Volume 8, Issue 3, 2022, Pages 809-830]
  • Airflow Optimization of Air Distribution Patterns by Arrangements of ‎Air Inlets and Outlets: Case Study of an Operating Room [Volume 8, Issue 3, 2022, Pages 809-830]
  • Amphibious vehicle Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
  • Amplitude-frequency relationship A Brief Review on the Asymptotic Methods for the Periodic ‎Behaviour of Microelectromechanical Systems [Volume 8, Issue 3, 2022, Pages 1120-1140]
  • Amplitude ratio Scattering and Backscattering Study of Mechanical Plane Wave in Composite Materials Plates (Earth model 1066B and LiNbO3) [Volume 8, Issue 2, 2022, Pages 518-527]
  • Analytical solution A Simple Approach for Dealing with Autonomous Conservative ‎Oscillator under Initial Velocity [Volume 8, Issue 3, 2022, Pages 918-924]
  • Analytical solution Two-dimensional Stress and strain Analysis for Graphene-‎polymer Nanocomposite under Axial Load [Volume 8, Issue 3, 2022, Pages 1065-1075]
  • Analytic model of hybridity Numerical Simulation of Unsteady Flow toward a Stretching/Shrinking Sheet in Porous Medium Filled with a Hybrid Nanofluid [Volume 8, Issue 1, 2022, Pages 11-20]
  • Anisotropic materials Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]
  • Area delamination factor Evaluating the Delamination in the Drilling Process of a Melamine Coated Medium Density Fiberboard (MDF) [Volume 8, Issue 1, 2022, Pages 1-10]
  • Arid regions Heating Capacity of an Earth to Air Heat Exchanger in Arid Regions - Experimental Investigation [Volume 8, Issue 2, 2022, Pages 429-437]
  • Artificial Intelligent Characterization of the Nonlinear Biaxial Mechanical Behavior ‎of Human Ureter using Constitutive Modeling and Artificial ‎Neural Networks [Volume 8, Issue 4, 2022, Pages 1186-1195]
  • Artificial Neural Network‎ Pull-in Phenomenon in the Electrostatically Micro-switch ‎Suspended between Two Conductive Plates using the Artificial ‎Neural Network [Volume 8, Issue 4, 2022, Pages 1222-1235]
  • Artificial Neural Networks Neural Networks with Input Dimensionality Reduction for ‎Efficient Temperature Distribution Prediction in a Warm ‎Stamping Process [Volume 8, Issue 4, 2022, Pages 1431-1444]
  • Asymptotic Numerical Study of Three-dimensional Boundary-layer Flow over ‎a Wedge: Magnetic Field Analysis [Volume 8, Issue 3, 2022, Pages 876-890]
  • Asymptotic methods A Brief Review on the Asymptotic Methods for the Periodic ‎Behaviour of Microelectromechanical Systems [Volume 8, Issue 3, 2022, Pages 1120-1140]
  • Axial gradient Free Vibration Analysis of 2D Functionally Graded Strip Beam using Finite ‎Element Method‎ [Volume 8, Issue 4, 2022, Pages 1422-1430]

B

  • Beam-columns Reduction in Space for Dynamic Finite Element Analysis of Assemblies of Beam-columns when the Mass is Available in Digitized Format [Volume 8, Issue 1, 2022, Pages 71-83]
  • Bending Finite Deformations of Fibre-reinforced Elastic Solids with ‎Fibre Bending Stiffness: A Spectral Approach [Volume 8, Issue 4, 2022, Pages 1332-1342]
  • Bending On the Thermo-elastic Response of FG-CNTRC Cross-ply ‎Laminated Plates under Temperature Loading using a New HSDT‎ [Volume 8, Issue 4, 2022, Pages 1370-1386]
  • Bending stiffness Finite Deformations of Fibre-reinforced Elastic Solids with ‎Fibre Bending Stiffness: A Spectral Approach [Volume 8, Issue 4, 2022, Pages 1332-1342]
  • BGK approximation Comparative Study of Hybrid Lattice Boltzmann and Vorticity-‎vector Potential Modelling of 2D and 3D Natural Convection ‎Combined with Rosseland Radiation [Volume 8, Issue 4, 2022, Pages 1467-1479]
  • Biaxial test Characterization of the Nonlinear Biaxial Mechanical Behavior ‎of Human Ureter using Constitutive Modeling and Artificial ‎Neural Networks [Volume 8, Issue 4, 2022, Pages 1186-1195]
  • Bi-convection Magnetized Bi-convective Nanofluid Flow and Entropy ‎Production Using Temperature-sensitive Base Fluid Properties:‎ A Unique Approach [Volume 8, Issue 4, 2022, Pages 1163-1175]
  • Bicycles On the Analytical and Computational Methodologies for Modelling Two-wheeled Vehicles within the Multibody Dynamics Framework: A Systematic Literature Review [Volume 8, Issue 1, 2022, Pages 153-181]
  • Bioconvection Non-similar Radiative Bioconvection Nanofluid Flow under ‎Oblique Magnetic Field with Entropy Generation‎ [Volume 8, Issue 1, 2022, Pages 206-218]
  • Bioheat Analysis of a Hyperbolic Heat Transfer Model in Blood-perfused ‎Biological Tissues with Laser Heating [Volume 8, Issue 4, 2022, Pages 1398-1406]
  • Blade configuration Thermal Performance of Oscillating Blade with Various ‎Geometries in a Straight Channel [Volume 8, Issue 1, 2022, Pages 114-128]
  • Blood perfusion Analysis of a Hyperbolic Heat Transfer Model in Blood-perfused ‎Biological Tissues with Laser Heating [Volume 8, Issue 4, 2022, Pages 1398-1406]
  • Bond Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]
  • Bone Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests [Volume 8, Issue 2, 2022, Pages 438-447]
  • Boundary element method Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
  • Boundedness Nonstandard Dynamically Consistent Numerical Methods for ‎MSEIR Model [Volume 8, Issue 1, 2022, Pages 196-205]
  • Buckling Dynamic Buckling of Stiffened Shell Structures with Transverse ‎Shears under Linearly Increasing Load [Volume 8, Issue 4, 2022, Pages 1343-1357]
  • Bushing Connector Element Theoretical and Experimental Investigation on Mechanical Behavior of Aluminum to Aluminum Tubular Bonded Lap Joint under Pure Torsion and a Finite Element Comparison with Hybrid Rivet/Bonded Joint [Volume 8, Issue 2, 2022, Pages 485-492]

C

  • Carbon nanotube reinforced composites On the Thermo-elastic Response of FG-CNTRC Cross-ply ‎Laminated Plates under Temperature Loading using a New HSDT‎ [Volume 8, Issue 4, 2022, Pages 1370-1386]
  • Casson-Carreau fluid Magneto Casson-Carreau Fluid Flow through a Circular Porous ‎Cylinder with Partial Slip‎ [Volume 8, Issue 4, 2022, Pages 1208-1221]
  • Casson Fluid Mathematical Analysis of Poiseuille Flow of Casson Fluid past Porous Medium [Volume 8, Issue 2, 2022, Pages 456-474]
  • Casson Nanofluid Stability Analysis of Casson Nanofluid Flow over an Extending/Contracting ‎Wedge and Stagnation Point [Volume 8, Issue 2, 2022, Pages 566-579]
  • Cattaneo-Christov Effect of Cattaneo-Christov Heat Flux on Radiative ‎Hydromagnetic Nanofluid Flow between Parallel Plates using ‎Spectral Quasilinearization Method [Volume 8, Issue 3, 2022, Pages 865-875]
  • CESE A Kinetic Flux-vector Splitting Scheme for Two-layer Shallow Flow Model [Volume 8, Issue 3, 2022, Pages 1043-1053]
  • CFD Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
  • CFD A Study of Curved Louver Fin Configuration for ‎Heat Transfer Enhancement [Volume 8, Issue 2, 2022, Pages 754-763]
  • CFD‎ Hydrodynamic Behavior in Solar Oil Heat Exchanger Ducts Fitted ‎with Staggered Baffles and Fins [Volume 8, Issue 3, 2022, Pages 774-790]
  • CFD‎ Twin Screw Expanders Profile Optimization Using Surrogate-‎Based Modelling [Volume 8, Issue 4, 2022, Pages 1141-1153]
  • CFD method Optimization of Air Distribution Patterns by Arrangements of ‎Air Inlets and Outlets: Case Study of an Operating Room [Volume 8, Issue 3, 2022, Pages 809-830]
  • Chain drive Multibody Efficiency Analysis of Chain Drives in Racing Motorcycles [Volume 8, Issue 3, 2022, Pages 1091-1102]
  • Chaos Chaos Control in Gear Transmission System using GPC and SMC ‎Controllers [Volume 8, Issue 2, 2022, Pages 545-556]
  • Chaotic Distributed-parameter Dynamic Modeling and Bifurcation Analysis of a Trapezoidal Piezomagnetoelastic Energy Harvester [Volume 8, Issue 1, 2022, Pages 97-113]
  • Chebyshev spectral collocation Effect of Cattaneo-Christov Heat Flux on Radiative ‎Hydromagnetic Nanofluid Flow between Parallel Plates using ‎Spectral Quasilinearization Method [Volume 8, Issue 3, 2022, Pages 865-875]
  • Chemical reaction Polymeric Dissipative Convection Flow from an Inclined Plane with Chemical Reaction: Numerical Study [Volume 8, Issue 2, 2022, Pages 416-428]
  • Chemical reaction Free Convection of Micropolar Fluid over an Infinite Inclined ‎Moving Porous Plate [Volume 8, Issue 4, 2022, Pages 1154-1162]
  • Closed chain Development of an Educational Code of Deriving Equations of ‎Motion and Analyzing Dynamic Characteristics of Multibody ‎Closed Chain Systems using GNU Octave for a Beginner [Volume 8, Issue 1, 2022, Pages 232-244]
  • Cohesive Element Theoretical and Experimental Investigation on Mechanical Behavior of Aluminum to Aluminum Tubular Bonded Lap Joint under Pure Torsion and a Finite Element Comparison with Hybrid Rivet/Bonded Joint [Volume 8, Issue 2, 2022, Pages 485-492]
  • Composite Topology Optimization of Laminated Composite Plates and Shells using Optimality Criteria [Volume 8, Issue 2, 2022, Pages 405-415]
  • Composite Multi-objective Optimal Design of Carbon and Glass Reinforced ‎Hybrid Composites under Flexural Loading [Volume 8, Issue 4, 2022, Pages 1324-1331]
  • Composite materials Scattering and Backscattering Study of Mechanical Plane Wave in Composite Materials Plates (Earth model 1066B and LiNbO3) [Volume 8, Issue 2, 2022, Pages 518-527]
  • Computational effort Reduction in Space for Dynamic Finite Element Analysis of Assemblies of Beam-columns when the Mass is Available in Digitized Format [Volume 8, Issue 1, 2022, Pages 71-83]
  • Computational fluid dynamics Geometric Optimization of Jet Pump Used in Vacuum ‎Distillation Applications under Different Operating Conditions ‎using Genetic-algorithm Methods [Volume 8, Issue 1, 2022, Pages 340-358]
  • Continuous dynamic optimization Direct Transcription Approach to Dynamic Optimization Problems in Engineering [Volume 8, Issue 2, 2022, Pages 605-616]
  • Convection heat transfer Thermal Performance of Oscillating Blade with Various ‎Geometries in a Straight Channel [Volume 8, Issue 1, 2022, Pages 114-128]
  • Convective flow Comments on the paper “Nonlinear Convective Flow of Maxwell ‎Fluid over a Slendering Stretching Sheet with Heat Source/Sink, ‎Mocherla Gayatri, Konda Jayaramireddy, Macherla Jayachandra ‎Babu, J. Appl. Comput. Mech., 8(1), 2022, 60-70”‎ [Volume 8, Issue 3, 2022, Pages 1032-1034]
  • Convective Heat Transfer A Study of Curved Louver Fin Configuration for ‎Heat Transfer Enhancement [Volume 8, Issue 2, 2022, Pages 754-763]
  • Convective-radiative fin Combined Impacts of Fin Surface Inclination and ‎Magnetohydrodynamics on the Thermal Performance of a Convective-Radiative Porous Fin‎ [Volume 8, Issue 3, 2022, Pages 940-948]
  • Convergence ‎analysis Numerical Scheme based on Non-polynomial Spline Functions for ‎the System of Second Order Boundary Value Problems arising in ‎Various Engineering Applications [Volume 8, Issue 1, 2022, Pages 144-152]
  • Corrugations An Experimental Comparison between Wing Root and Wingtip ‎Corrugation Patterns of Dragonfly Wing at Ultra-low Reynolds ‎Number and High Angles of Attack‎ [Volume 8, Issue 4, 2022, Pages 1176-1185]
  • Crack Investigation on the Crack Effect in the Cylinder and Matrix on the Backscattering Field Frequency Specifications using the Finite Element Method [Volume 8, Issue 2, 2022, Pages 448-455]
  • Cross-diffusion‎ MHD Non-Newtonian Fluid Flow past a Stretching Sheet under ‎the Influence of Non-linear Radiation and Viscous Dissipation [Volume 8, Issue 3, 2022, Pages 949-961]
  • Crystallographic ‎Directions Nonlinear Primary Frequency Response Analysis of Self-‎Sustaining Nanobeam Considering Surface Elasticity [Volume 8, Issue 4, 2022, Pages 1196-1207]
  • Cubic non-polynomial spline Numerical Scheme based on Non-polynomial Spline Functions for ‎the System of Second Order Boundary Value Problems arising in ‎Various Engineering Applications [Volume 8, Issue 1, 2022, Pages 144-152]
  • Curing Experimental and Finite Element Study to Determine the ‎Mechanical Properties and Bond Between Repair Mortars and ‎Concrete Substrates [Volume 8, Issue 2, 2022, Pages 493-509]
  • Curved-wall Conical diffusers Analytical Solutions and Analyses of the Displacement ‎Separating Point in Diffusers [Volume 8, Issue 3, 2022, Pages 891-903]
  • Cutting Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests [Volume 8, Issue 2, 2022, Pages 438-447]
  • Cyclic loading Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]

D

  • D3Q19 scheme‎ Comparative Study of Hybrid Lattice Boltzmann and Vorticity-‎vector Potential Modelling of 2D and 3D Natural Convection ‎Combined with Rosseland Radiation [Volume 8, Issue 4, 2022, Pages 1467-1479]
  • Damage‎ Computational Enhancement of a Mixed 3D Beam Finite Element with Warping and Damage [Volume 8, Issue 1, 2022, Pages 260-281]
  • Delay Stability Analysis of Gyroscopic Systems with Delay under ‎Synchronous and Asynchronous Switching [Volume 8, Issue 3, 2022, Pages 1113-1119]
  • Design of Experiments Twin Screw Expanders Profile Optimization Using Surrogate-‎Based Modelling [Volume 8, Issue 4, 2022, Pages 1141-1153]
  • Design of experiments (DoE) Multi-objective Optimization of Shot-peening Parameters using ‎Design of Experiments and Finite Element Simulation: A ‎Statistical Model [Volume 8, Issue 3, 2022, Pages 838-852]
  • Differential Algebraic Equation Development of an Educational Code of Deriving Equations of ‎Motion and Analyzing Dynamic Characteristics of Multibody ‎Closed Chain Systems using GNU Octave for a Beginner [Volume 8, Issue 1, 2022, Pages 232-244]
  • Diffusion Thermal Diffusion Responses in an Infinite Medium with a ‎Spherical Cavity using the Atangana-Baleanu Fractional ‎Operator [Volume 8, Issue 4, 2022, Pages 1358-1369]
  • Direct methods Direct Transcription Approach to Dynamic Optimization Problems in Engineering [Volume 8, Issue 2, 2022, Pages 605-616]
  • Dispersion curve‎ Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]
  • Displacement thickness‎ Numerical Study of Three-dimensional Boundary-layer Flow over ‎a Wedge: Magnetic Field Analysis [Volume 8, Issue 3, 2022, Pages 876-890]
  • Dissipative heat Theoretical Investigation of Viscosity and Thermal Conductivity ‎of a Gas along a Non-isothermal Vertical Surface in Porous ‎Environment with Dissipative Heat: Numerical Technique [Volume 8, Issue 4, 2022, Pages 1236-1245]
  • Distinct Element Method Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]
  • Double-Layer Graphene Sheets Buckling and Vibration Analysis of a Double-layer Graphene ‎Sheet Coupled with a Piezoelectric Nanoplate [Volume 8, Issue 1, 2022, Pages 129-143]
  • Dragonfly wings An Experimental Comparison between Wing Root and Wingtip ‎Corrugation Patterns of Dragonfly Wing at Ultra-low Reynolds ‎Number and High Angles of Attack‎ [Volume 8, Issue 4, 2022, Pages 1176-1185]
  • Drilling Evaluating the Delamination in the Drilling Process of a Melamine Coated Medium Density Fiberboard (MDF) [Volume 8, Issue 1, 2022, Pages 1-10]
  • Dual solutions Stability Analysis of Casson Nanofluid Flow over an Extending/Contracting ‎Wedge and Stagnation Point [Volume 8, Issue 2, 2022, Pages 566-579]
  • Duffing oscillator A Simple Approach for Dealing with Autonomous Conservative ‎Oscillator under Initial Velocity [Volume 8, Issue 3, 2022, Pages 918-924]
  • Dynamic finite element analysis Reduction in Space for Dynamic Finite Element Analysis of Assemblies of Beam-columns when the Mass is Available in Digitized Format [Volume 8, Issue 1, 2022, Pages 71-83]

E

  • Eentropy production.‎ Magnetized Bi-convective Nanofluid Flow and Entropy ‎Production Using Temperature-sensitive Base Fluid Properties:‎ A Unique Approach [Volume 8, Issue 4, 2022, Pages 1163-1175]
  • Efficiency Research into the Properties of Selected Single Speed Two-Carrier ‎Planetary Gear Trains [Volume 8, Issue 2, 2022, Pages 699-709]
  • Efficiency Multibody Efficiency Analysis of Chain Drives in Racing Motorcycles [Volume 8, Issue 3, 2022, Pages 1091-1102]
  • Elastic limit ‎angular velocity and acceleration Elastic Limit Angular Velocity and Acceleration Investigation in Non-‎Uniform Rotating Disk under Time-Dependent Mechanical Loading [Volume 8, Issue 3, 2022, Pages 791-808]
  • Electro-osmotic flow‎ A Closed-Form Solution for Electro-Osmotic Flow in Nano-Channels [Volume 8, Issue 2, 2022, Pages 510-517]
  • Electrostatic Pull-in Phenomenon in the Electrostatically Micro-switch ‎Suspended between Two Conductive Plates using the Artificial ‎Neural Network [Volume 8, Issue 4, 2022, Pages 1222-1235]
  • Energy harvesting Distributed-parameter Dynamic Modeling and Bifurcation Analysis of a Trapezoidal Piezomagnetoelastic Energy Harvester [Volume 8, Issue 1, 2022, Pages 97-113]
  • Energy ratio Scattering and Backscattering Study of Mechanical Plane Wave in Composite Materials Plates (Earth model 1066B and LiNbO3) [Volume 8, Issue 2, 2022, Pages 518-527]
  • Enhanced beam formulation Computational Enhancement of a Mixed 3D Beam Finite Element with Warping and Damage [Volume 8, Issue 1, 2022, Pages 260-281]
  • Entropy Non-similar Radiative Bioconvection Nanofluid Flow under ‎Oblique Magnetic Field with Entropy Generation‎ [Volume 8, Issue 1, 2022, Pages 206-218]
  • Entropy generation Mixed Convection Heat Transfer and Entropy Generation in a ‎Water-filled Square Cavity Partially Heated from Below: The ‎Effects of Richardson and Prandtl Numbers [Volume 8, Issue 1, 2022, Pages 282-297]
  • Error analysis‎ Numerical Scheme based on Non-polynomial Spline Functions for ‎the System of Second Order Boundary Value Problems arising in ‎Various Engineering Applications [Volume 8, Issue 1, 2022, Pages 144-152]
  • Euler-Bernoulli beam An Analysis of Nonlinear Beam Vibrations with the Extended ‎Rayleigh-Ritz Method [Volume 8, Issue 4, 2022, Pages 1299-1306]
  • Experiment The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
  • Experiment Experimental Study and Identification of a Dynamic ‎Deformation Model of Dry Clay at Strain Rates up to 2500 s-1‎ [Volume 8, Issue 3, 2022, Pages 981-995]
  • Extended Rayleigh-Ritz Method (ERRM) An Analysis of Nonlinear Beam Vibrations with the Extended ‎Rayleigh-Ritz Method [Volume 8, Issue 4, 2022, Pages 1299-1306]

F

  • Falkner-Skan flow Stability Analysis of Casson Nanofluid Flow over an Extending/Contracting ‎Wedge and Stagnation Point [Volume 8, Issue 2, 2022, Pages 566-579]
  • Fibre-reinforced solids Finite Deformations of Fibre-reinforced Elastic Solids with ‎Fibre Bending Stiffness: A Spectral Approach [Volume 8, Issue 4, 2022, Pages 1332-1342]
  • Finite difference method Mixed Convection Heat Transfer and Entropy Generation in a ‎Water-filled Square Cavity Partially Heated from Below: The ‎Effects of Richardson and Prandtl Numbers [Volume 8, Issue 1, 2022, Pages 282-297]
  • Finite elasticity Finite Deformations of Fibre-reinforced Elastic Solids with ‎Fibre Bending Stiffness: A Spectral Approach [Volume 8, Issue 4, 2022, Pages 1332-1342]
  • Finite element‎ Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
  • Finite element analysis Neural Networks with Input Dimensionality Reduction for ‎Efficient Temperature Distribution Prediction in a Warm ‎Stamping Process [Volume 8, Issue 4, 2022, Pages 1431-1444]
  • Finite element analysis‎ Mechanical Characterisation and Comparison of Hyperelastic ‎Adhesives: Modelling and Experimental Validation [Volume 8, Issue 1, 2022, Pages 359-369]
  • Finite element analysis‎ Free Vibration Analysis of 2D Functionally Graded Strip Beam using Finite ‎Element Method‎ [Volume 8, Issue 4, 2022, Pages 1422-1430]
  • Finite element method Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests [Volume 8, Issue 2, 2022, Pages 438-447]
  • Finite element method Investigation on the Crack Effect in the Cylinder and Matrix on the Backscattering Field Frequency Specifications using the Finite Element Method [Volume 8, Issue 2, 2022, Pages 448-455]
  • Finite element method Theoretical and Experimental Investigation on Mechanical Behavior of Aluminum to Aluminum Tubular Bonded Lap Joint under Pure Torsion and a Finite Element Comparison with Hybrid Rivet/Bonded Joint [Volume 8, Issue 2, 2022, Pages 485-492]
  • Finite element method Multi-objective Optimization of Shot-peening Parameters using ‎Design of Experiments and Finite Element Simulation: A ‎Statistical Model [Volume 8, Issue 3, 2022, Pages 838-852]
  • Finite volume method Higher-Order Slope Limiters for Euler Equation [Volume 8, Issue 3, 2022, Pages 904-917]
  • Fin surface inclination Combined Impacts of Fin Surface Inclination and ‎Magnetohydrodynamics on the Thermal Performance of a Convective-Radiative Porous Fin‎ [Volume 8, Issue 3, 2022, Pages 940-948]
  • Flexible adhesive Mechanical Characterisation and Comparison of Hyperelastic ‎Adhesives: Modelling and Experimental Validation [Volume 8, Issue 1, 2022, Pages 359-369]
  • Flexible Impeller Pumps (FIPs) Finite Elements Analysis of the Hyperelastic Impeller Rotating in ‎the Self-Priming Pump [Volume 8, Issue 3, 2022, Pages 1103-1112]
  • Flow physics An Experimental Comparison between Wing Root and Wingtip ‎Corrugation Patterns of Dragonfly Wing at Ultra-low Reynolds ‎Number and High Angles of Attack‎ [Volume 8, Issue 4, 2022, Pages 1176-1185]
  • Fluid Viscosity and Thermal Conductivity Theoretical Investigation of Viscosity and Thermal Conductivity ‎of a Gas along a Non-isothermal Vertical Surface in Porous ‎Environment with Dissipative Heat: Numerical Technique [Volume 8, Issue 4, 2022, Pages 1236-1245]
  • Forced Convection Impact of the Narrowing System at Different Locations and ‎Heights on the Performance of a Plane Solar Collector [Volume 8, Issue 4, 2022, Pages 1445-1455]
  • Forecasting Analysis of Possibilities to Use Predictive Mathematical Models ‎for Studying the Dam Deformation State [Volume 8, Issue 2, 2022, Pages 733-744]
  • Form function Investigation on the Crack Effect in the Cylinder and Matrix on the Backscattering Field Frequency Specifications using the Finite Element Method [Volume 8, Issue 2, 2022, Pages 448-455]
  • Fortran 2003 A Comparative Study on the Efficiency of Compiled Languages ‎and MATLAB/Simulink for Simulation of Highly Nonlinear ‎Automotive Systems [Volume 8, Issue 3, 2022, Pages 853-864]
  • Fractional calculus Numerical Solution of the Time Fractional Reaction-advection-diffusion Equation in Porous Media [Volume 8, Issue 1, 2022, Pages 84-96]
  • Free convection Free Convection of Micropolar Fluid over an Infinite Inclined ‎Moving Porous Plate [Volume 8, Issue 4, 2022, Pages 1154-1162]
  • Freedman-Diaconis rule Refined Cross-sample Entropy based on Freedman-Diaconis Rule: ‎Application to Foreign Exchange Time Series [Volume 8, Issue 3, 2022, Pages 1005-1013]
  • Friction stir welding A Hybrid SVM-RVM Algorithm to Mechanical Properties in the Friction Stir Welding Process [Volume 8, Issue 1, 2022, Pages 36-47]
  • Friction-Transfer Experimental and Finite Element Study to Determine the ‎Mechanical Properties and Bond Between Repair Mortars and ‎Concrete Substrates [Volume 8, Issue 2, 2022, Pages 493-509]
  • Functionally graded Dynamic Response of Functionally Graded Carbon ‎Nanotube-Reinforced Hybrid Composite Plates [Volume 8, Issue 1, 2022, Pages 182-195]
  • Functionally graded Effect of Porosity and Hygrothermal Environment on FGP ‎Hollow Spheres under Electromechanical Loads [Volume 8, Issue 2, 2022, Pages 710-722]
  • Functionally graded material Size Effect on the Axisymmetric Vibrational Response of ‎Functionally Graded Circular Nano-Plate Based on the Nonlocal Stress-Driven Method [Volume 8, Issue 3, 2022, Pages 962-980]
  • Functionally Graded Strip Free Vibration Analysis of 2D Functionally Graded Strip Beam using Finite ‎Element Method‎ [Volume 8, Issue 4, 2022, Pages 1422-1430]
  • Functionally graded structure Effects of Periodic Loading on Longitudinal Fracture in ‎Viscoelastic Functionally Graded Beam Structures‎ [Volume 8, Issue 1, 2022, Pages 370-378]

G

  • Gauss Lobatto grid points‎ Effect of Cattaneo-Christov Heat Flux on Radiative ‎Hydromagnetic Nanofluid Flow between Parallel Plates using ‎Spectral Quasilinearization Method [Volume 8, Issue 3, 2022, Pages 865-875]
  • Gear transmission system Chaos Control in Gear Transmission System using GPC and SMC ‎Controllers [Volume 8, Issue 2, 2022, Pages 545-556]
  • GNU Octave Development of an Educational Code of Deriving Equations of ‎Motion and Analyzing Dynamic Characteristics of Multibody ‎Closed Chain Systems using GNU Octave for a Beginner [Volume 8, Issue 1, 2022, Pages 232-244]
  • GPC Chaos Control in Gear Transmission System using GPC and SMC ‎Controllers [Volume 8, Issue 2, 2022, Pages 545-556]
  • Graphene-SU8-polymethyl methacrylate (PMMA) Two-dimensional Stress and strain Analysis for Graphene-‎polymer Nanocomposite under Axial Load [Volume 8, Issue 3, 2022, Pages 1065-1075]
  • Gyroid Generation of a Quadrilateral Mesh based on NURBS for Gyroids ‎of Variable Thickness and Porosity [Volume 8, Issue 2, 2022, Pages 684-698]
  • Gyroscopic systems Stability Analysis of Gyroscopic Systems with Delay under ‎Synchronous and Asynchronous Switching [Volume 8, Issue 3, 2022, Pages 1113-1119]

H

  • Haar wavelets Haar Wavelet Method for Solving High-Order Differential Equations with Multi-Point Boundary Conditions [Volume 8, Issue 2, 2022, Pages 528-544]
  • Hamilton-Crosser model A New Modified Hamilton-Crosser and Nan Models for Thermal ‎Conductivity of Different Lengths Carbon Nanotubes Water-‎based Nanofluids [Volume 8, Issue 3, 2022, Pages 831-837]
  • Hardness A Hybrid SVM-RVM Algorithm to Mechanical Properties in the Friction Stir Welding Process [Volume 8, Issue 1, 2022, Pages 36-47]
  • Heat exchanger A Study of Curved Louver Fin Configuration for ‎Heat Transfer Enhancement [Volume 8, Issue 2, 2022, Pages 754-763]
  • Heat generation Metal and Metallic Oxide Nanofluid over a Shrinking Surface with ‎Thermal Radiation and Heat Generation/Absorption [Volume 8, Issue 2, 2022, Pages 557-565]
  • Heat source/sink Nonlinear Convective Flow of Maxwell Fluid over a Slendering Stretching Sheet with Heat Source/Sink [Volume 8, Issue 1, 2022, Pages 60-70]
  • Heat source/sink Free Convection of Micropolar Fluid over an Infinite Inclined ‎Moving Porous Plate [Volume 8, Issue 4, 2022, Pages 1154-1162]
  • Heat transport Analysis of a Hyperbolic Heat Transfer Model in Blood-perfused ‎Biological Tissues with Laser Heating [Volume 8, Issue 4, 2022, Pages 1398-1406]
  • He’s Polynomials Numerical Solution of the Time Fractional Reaction-advection-diffusion Equation in Porous Media [Volume 8, Issue 1, 2022, Pages 84-96]
  • High-order differential equations Haar Wavelet Method for Solving High-Order Differential Equations with Multi-Point Boundary Conditions [Volume 8, Issue 2, 2022, Pages 528-544]
  • Homotopy Analysis Method Non-similar Radiative Bioconvection Nanofluid Flow under ‎Oblique Magnetic Field with Entropy Generation‎ [Volume 8, Issue 1, 2022, Pages 206-218]
  • Homotopy Perturbation Numerical Solution of the Time Fractional Reaction-advection-diffusion Equation in Porous Media [Volume 8, Issue 1, 2022, Pages 84-96]
  • Homotopy perturbation method Elastic Limit Angular Velocity and Acceleration Investigation in Non-‎Uniform Rotating Disk under Time-Dependent Mechanical Loading [Volume 8, Issue 3, 2022, Pages 791-808]
  • Hybrid Multi-objective Optimal Design of Carbon and Glass Reinforced ‎Hybrid Composites under Flexural Loading [Volume 8, Issue 4, 2022, Pages 1324-1331]
  • Hybrid Joint Theoretical and Experimental Investigation on Mechanical Behavior of Aluminum to Aluminum Tubular Bonded Lap Joint under Pure Torsion and a Finite Element Comparison with Hybrid Rivet/Bonded Joint [Volume 8, Issue 2, 2022, Pages 485-492]
  • Hybrid nanofluid Numerical Simulation of Unsteady Flow toward a Stretching/Shrinking Sheet in Porous Medium Filled with a Hybrid Nanofluid [Volume 8, Issue 1, 2022, Pages 11-20]
  • Hybrid-nanofluids Heat Transfer of Hybrid-nanofluids Flow Past a Permeable Flat Surface with Different Volume Fractions [Volume 8, Issue 1, 2022, Pages 21-35]
  • Hydromagnetic flow Effect of Cattaneo-Christov Heat Flux on Radiative ‎Hydromagnetic Nanofluid Flow between Parallel Plates using ‎Spectral Quasilinearization Method [Volume 8, Issue 3, 2022, Pages 865-875]
  • Hygrothermal effect Effect of Porosity and Hygrothermal Environment on FGP ‎Hollow Spheres under Electromechanical Loads [Volume 8, Issue 2, 2022, Pages 710-722]
  • Hyperelastic models Mechanical Characterisation and Comparison of Hyperelastic ‎Adhesives: Modelling and Experimental Validation [Volume 8, Issue 1, 2022, Pages 359-369]

I

  • Inclined plate Polymeric Dissipative Convection Flow from an Inclined Plane with Chemical Reaction: Numerical Study [Volume 8, Issue 2, 2022, Pages 416-428]
  • Inclined plate Free Convection of Micropolar Fluid over an Infinite Inclined ‎Moving Porous Plate [Volume 8, Issue 4, 2022, Pages 1154-1162]

J

  • Jacobi collocation method Numerical Investigations of the Coupled Nonlinear Non-homogeneous Partial Differential Equations [Volume 8, Issue 3, 2022, Pages 1054-1064]
  • Jeffery-Hamel flow Investigation of Jeffery-Hamel Flow for Nanofluid in the Presence of Magnetic Field by a New Approach in the Optimal Homotopy Analysis Method [Volume 8, Issue 1, 2022, Pages 48-59]

K

  • Keller-box Numerical Study of Three-dimensional Boundary-layer Flow over ‎a Wedge: Magnetic Field Analysis [Volume 8, Issue 3, 2022, Pages 876-890]
  • Keller-Box Method Magneto Casson-Carreau Fluid Flow through a Circular Porous ‎Cylinder with Partial Slip‎ [Volume 8, Issue 4, 2022, Pages 1208-1221]
  • Kerr-type foundation Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
  • KFVS scheme A Kinetic Flux-vector Splitting Scheme for Two-layer Shallow Flow Model [Volume 8, Issue 3, 2022, Pages 1043-1053]
  • Kolsky method Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]

L

  • Lagrange multiplier Development of an Educational Code of Deriving Equations of ‎Motion and Analyzing Dynamic Characteristics of Multibody ‎Closed Chain Systems using GNU Octave for a Beginner [Volume 8, Issue 1, 2022, Pages 232-244]
  • Lagrange procedure Application of Newmark Average Acceleration and Ritz Methods ‎on Dynamical Analysis of Composite Beams under a Moving Load [Volume 8, Issue 2, 2022, Pages 764-773]
  • Lagrange’s case Rotations of a Rigid Body Close to the Lagrange Case under the ‎Action of Nonstationary Perturbation Torque [Volume 8, Issue 3, 2022, Pages 1023-1031]
  • Lamb waves Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]
  • Laminar Impact of the Narrowing System at Different Locations and ‎Heights on the Performance of a Plane Solar Collector [Volume 8, Issue 4, 2022, Pages 1445-1455]
  • Laplace transform Heat Transfer of Hybrid-nanofluids Flow Past a Permeable Flat Surface with Different Volume Fractions [Volume 8, Issue 1, 2022, Pages 21-35]
  • Laplace transform Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
  • Lattice Boltzmann method Transient Response of Longitudinal Fins under Step Changes in ‎Base Temperature and Heat Flux using Lattice Boltzmann ‎Method [Volume 8, Issue 3, 2022, Pages 925-939]
  • Legendre polynomials Spectral Methods Application in Problems of the Thin-walled ‎Structures Deformation [Volume 8, Issue 2, 2022, Pages 641-654]
  • Linearization technique Magnetized Bi-convective Nanofluid Flow and Entropy ‎Production Using Temperature-sensitive Base Fluid Properties:‎ A Unique Approach [Volume 8, Issue 4, 2022, Pages 1163-1175]
  • Linear System Numerical Scheme based on Non-polynomial Spline Functions for ‎the System of Second Order Boundary Value Problems arising in ‎Various Engineering Applications [Volume 8, Issue 1, 2022, Pages 144-152]
  • Lorenz attractor Refined Cross-sample Entropy based on Freedman-Diaconis Rule: ‎Application to Foreign Exchange Time Series [Volume 8, Issue 3, 2022, Pages 1005-1013]
  • Louver Fin A Study of Curved Louver Fin Configuration for ‎Heat Transfer Enhancement [Volume 8, Issue 2, 2022, Pages 754-763]
  • Lüders bands Influence of Up-down-up Constitutive Equation Parameters on ‎Yield Plateau Stage of Mild Steel Samples Subjected to Stretching [Volume 8, Issue 4, 2022, Pages 1315-1323]

M

  • Magnetic Numerical Simulation of Unsteady Flow toward a Stretching/Shrinking Sheet in Porous Medium Filled with a Hybrid Nanofluid [Volume 8, Issue 1, 2022, Pages 11-20]
  • Magnetic field Distributed-parameter Dynamic Modeling and Bifurcation Analysis of a Trapezoidal Piezomagnetoelastic Energy Harvester [Volume 8, Issue 1, 2022, Pages 97-113]
  • Magnetic field Theoretical Study of Convective Heat Transfer in Ternary ‎Nanofluid Flowing past a Stretching Sheet [Volume 8, Issue 4, 2022, Pages 1279-1286]
  • Magnetohydrodynamics Combined Impacts of Fin Surface Inclination and ‎Magnetohydrodynamics on the Thermal Performance of a Convective-Radiative Porous Fin‎ [Volume 8, Issue 3, 2022, Pages 940-948]
  • Marangoni convection Heat Transfer of Hybrid-nanofluids Flow Past a Permeable Flat Surface with Different Volume Fractions [Volume 8, Issue 1, 2022, Pages 21-35]
  • Mathematical analysis Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
  • MAVs An Experimental Comparison between Wing Root and Wingtip ‎Corrugation Patterns of Dragonfly Wing at Ultra-low Reynolds ‎Number and High Angles of Attack‎ [Volume 8, Issue 4, 2022, Pages 1176-1185]
  • Maxwell fluid Nonlinear Convective Flow of Maxwell Fluid over a Slendering Stretching Sheet with Heat Source/Sink [Volume 8, Issue 1, 2022, Pages 60-70]
  • Maxwell fluid Comments on the paper “Nonlinear Convective Flow of Maxwell ‎Fluid over a Slendering Stretching Sheet with Heat Source/Sink, ‎Mocherla Gayatri, Konda Jayaramireddy, Macherla Jayachandra ‎Babu, J. Appl. Comput. Mech., 8(1), 2022, 60-70”‎ [Volume 8, Issue 3, 2022, Pages 1032-1034]
  • Mean velocity Mathematical Analysis of Poiseuille Flow of Casson Fluid past Porous Medium [Volume 8, Issue 2, 2022, Pages 456-474]
  • Mean velocity.‎ Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
  • Mechanical characterisation Mechanical Characterisation and Comparison of Hyperelastic ‎Adhesives: Modelling and Experimental Validation [Volume 8, Issue 1, 2022, Pages 359-369]
  • Mechanical properties Experimental and Finite Element Study to Determine the ‎Mechanical Properties and Bond Between Repair Mortars and ‎Concrete Substrates [Volume 8, Issue 2, 2022, Pages 493-509]
  • Medium density fiberboard (MDF) Evaluating the Delamination in the Drilling Process of a Melamine Coated Medium Density Fiberboard (MDF) [Volume 8, Issue 1, 2022, Pages 1-10]
  • MEMS Pull-in Phenomenon in the Electrostatically Micro-switch ‎Suspended between Two Conductive Plates using the Artificial ‎Neural Network [Volume 8, Issue 4, 2022, Pages 1222-1235]
  • MEMS Impact-enhanced Electrostatic Vibration Energy Harvester [Volume 8, Issue 2, 2022, Pages 671-683]
  • MHD Metal and Metallic Oxide Nanofluid over a Shrinking Surface with ‎Thermal Radiation and Heat Generation/Absorption [Volume 8, Issue 2, 2022, Pages 557-565]
  • MHD MHD Non-Newtonian Fluid Flow past a Stretching Sheet under ‎the Influence of Non-linear Radiation and Viscous Dissipation [Volume 8, Issue 3, 2022, Pages 949-961]
  • MHD Magneto Casson-Carreau Fluid Flow through a Circular Porous ‎Cylinder with Partial Slip‎ [Volume 8, Issue 4, 2022, Pages 1208-1221]
  • Microelectromechanical systems A Brief Review on the Asymptotic Methods for the Periodic ‎Behaviour of Microelectromechanical Systems [Volume 8, Issue 3, 2022, Pages 1120-1140]
  • Micropolar Fluid Free Convection of Micropolar Fluid over an Infinite Inclined ‎Moving Porous Plate [Volume 8, Issue 4, 2022, Pages 1154-1162]
  • Mixed convection Mixed Convection Heat Transfer and Entropy Generation in a ‎Water-filled Square Cavity Partially Heated from Below: The ‎Effects of Richardson and Prandtl Numbers [Volume 8, Issue 1, 2022, Pages 282-297]
  • Mixed Finite Element Computational Enhancement of a Mixed 3D Beam Finite Element with Warping and Damage [Volume 8, Issue 1, 2022, Pages 260-281]
  • Model modifications A New Modified Hamilton-Crosser and Nan Models for Thermal ‎Conductivity of Different Lengths Carbon Nanotubes Water-‎based Nanofluids [Volume 8, Issue 3, 2022, Pages 831-837]
  • Model predictive control Chaos Control in Gear Transmission System using GPC and SMC ‎Controllers [Volume 8, Issue 2, 2022, Pages 545-556]
  • Modified couple stress theory A Modified Couple Stress-Based Model for the Nonlinear ‎Vibrational Analysis of Nano-Disks Using Multiple Scales Method [Volume 8, Issue 2, 2022, Pages 580-596]
  • Monoclinic Scattering and Backscattering Study of Mechanical Plane Wave in Composite Materials Plates (Earth model 1066B and LiNbO3) [Volume 8, Issue 2, 2022, Pages 518-527]
  • Motorcycles On the Analytical and Computational Methodologies for Modelling Two-wheeled Vehicles within the Multibody Dynamics Framework: A Systematic Literature Review [Volume 8, Issue 1, 2022, Pages 153-181]
  • Multi-body dynamics Development of an Educational Code of Deriving Equations of ‎Motion and Analyzing Dynamic Characteristics of Multibody ‎Closed Chain Systems using GNU Octave for a Beginner [Volume 8, Issue 1, 2022, Pages 232-244]
  • Multilayered wellbore Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]
  • Multilayer piezoelectric/piezomagnetic material Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]
  • Multiple scales method A Modified Couple Stress-Based Model for the Nonlinear ‎Vibrational Analysis of Nano-Disks Using Multiple Scales Method [Volume 8, Issue 2, 2022, Pages 580-596]
  • Multi-point boundary value problems Haar Wavelet Method for Solving High-Order Differential Equations with Multi-Point Boundary Conditions [Volume 8, Issue 2, 2022, Pages 528-544]
  • MWCNT particles Thermal Analysis of Radiating Film Flow of Sodium Alginate ‎using MWCNT Nanoparticles ‎ [Volume 8, Issue 1, 2022, Pages 219-231]

N

  • Nan model A New Modified Hamilton-Crosser and Nan Models for Thermal ‎Conductivity of Different Lengths Carbon Nanotubes Water-‎based Nanofluids [Volume 8, Issue 3, 2022, Pages 831-837]
  • Nanoencapsulated phase-change suspension A Deep Learning Approach to Predict the Flow Field and Thermal ‎Patterns of Nonencapsulated Phase Change Materials ‎Suspensions in an Enclosure‎ [Volume 8, Issue 4, 2022, Pages 1270-1278]
  • Nanofluid Investigation of Jeffery-Hamel Flow for Nanofluid in the Presence of Magnetic Field by a New Approach in the Optimal Homotopy Analysis Method [Volume 8, Issue 1, 2022, Pages 48-59]
  • Nanofluid Metal and Metallic Oxide Nanofluid over a Shrinking Surface with ‎Thermal Radiation and Heat Generation/Absorption [Volume 8, Issue 2, 2022, Pages 557-565]
  • Nano-switch Pull-in Instability Analysis of a Nanocantilever Based on the ‎Two-Phase Nonlocal Theory of Elasticity [Volume 8, Issue 4, 2022, Pages 1456-1466]
  • Natural ‎convection heat transfer A Deep Learning Approach to Predict the Flow Field and Thermal ‎Patterns of Nonencapsulated Phase Change Materials ‎Suspensions in an Enclosure‎ [Volume 8, Issue 4, 2022, Pages 1270-1278]
  • Natural frequency Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]
  • Newmark Average Acceleration method Application of Newmark Average Acceleration and Ritz Methods ‎on Dynamical Analysis of Composite Beams under a Moving Load [Volume 8, Issue 2, 2022, Pages 764-773]
  • Non-dimensional approach Prediction Capabilities of a One-dimensional Wall-flow ‎Particulate Filter Model [Volume 8, Issue 1, 2022, Pages 245-259]
  • Non-ductile RC member Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
  • Nonequilibrium thermodynamics Analysis of a Hyperbolic Heat Transfer Model in Blood-perfused ‎Biological Tissues with Laser Heating [Volume 8, Issue 4, 2022, Pages 1398-1406]
  • Nonlinear Chaos Control in Gear Transmission System using GPC and SMC ‎Controllers [Volume 8, Issue 2, 2022, Pages 545-556]
  • Nonlinear Analysis Computational Enhancement of a Mixed 3D Beam Finite Element with Warping and Damage [Volume 8, Issue 1, 2022, Pages 260-281]
  • Nonlinear control On the Analytical and Computational Methodologies for Modelling Two-wheeled Vehicles within the Multibody Dynamics Framework: A Systematic Literature Review [Volume 8, Issue 1, 2022, Pages 153-181]
  • Nonlinear convective flow Nonlinear Convective Flow of Maxwell Fluid over a Slendering Stretching Sheet with Heat Source/Sink [Volume 8, Issue 1, 2022, Pages 60-70]
  • Nonlinear coupled hyperbolic Klein-Gordon equations Numerical Investigations of the Coupled Nonlinear Non-homogeneous Partial Differential Equations [Volume 8, Issue 3, 2022, Pages 1054-1064]
  • Nonlinear mechanical properties Characterization of the Nonlinear Biaxial Mechanical Behavior ‎of Human Ureter using Constitutive Modeling and Artificial ‎Neural Networks [Volume 8, Issue 4, 2022, Pages 1186-1195]
  • Non-linear Ordinary Differential Equation Investigation of Jeffery-Hamel Flow for Nanofluid in the Presence of Magnetic Field by a New Approach in the Optimal Homotopy Analysis Method [Volume 8, Issue 1, 2022, Pages 48-59]
  • Nonlinear oscillator A Simple Approach for Dealing with Autonomous Conservative ‎Oscillator under Initial Velocity [Volume 8, Issue 3, 2022, Pages 918-924]
  • Nonlinear oscillators A Brief Review on the Asymptotic Methods for the Periodic ‎Behaviour of Microelectromechanical Systems [Volume 8, Issue 3, 2022, Pages 1120-1140]
  • Nonlinear phenomena Numerical Investigations of the Coupled Nonlinear Non-homogeneous Partial Differential Equations [Volume 8, Issue 3, 2022, Pages 1054-1064]
  • Nonlinear programming Direct Transcription Approach to Dynamic Optimization Problems in Engineering [Volume 8, Issue 2, 2022, Pages 605-616]
  • Non-linear radiation MHD Non-Newtonian Fluid Flow past a Stretching Sheet under ‎the Influence of Non-linear Radiation and Viscous Dissipation [Volume 8, Issue 3, 2022, Pages 949-961]
  • Nonlinear vibration An Analysis of Nonlinear Beam Vibrations with the Extended ‎Rayleigh-Ritz Method [Volume 8, Issue 4, 2022, Pages 1299-1306]
  • Nonlocal ‎Piezoelasticity Theory Buckling and Vibration Analysis of a Double-layer Graphene ‎Sheet Coupled with a Piezoelectric Nanoplate [Volume 8, Issue 1, 2022, Pages 129-143]
  • Non-similar Non-similar Radiative Bioconvection Nanofluid Flow under ‎Oblique Magnetic Field with Entropy Generation‎ [Volume 8, Issue 1, 2022, Pages 206-218]
  • Nonstandard Finite Difference‎ Nonstandard Dynamically Consistent Numerical Methods for ‎MSEIR Model [Volume 8, Issue 1, 2022, Pages 196-205]
  • Non-uniform thickness and density disk Elastic Limit Angular Velocity and Acceleration Investigation in Non-‎Uniform Rotating Disk under Time-Dependent Mechanical Loading [Volume 8, Issue 3, 2022, Pages 791-808]
  • Numerical approach‎ Prediction Capabilities of a One-dimensional Wall-flow ‎Particulate Filter Model [Volume 8, Issue 1, 2022, Pages 245-259]
  • Numerical approximation Numerical Scheme based on Non-polynomial Spline Functions for ‎the System of Second Order Boundary Value Problems arising in ‎Various Engineering Applications [Volume 8, Issue 1, 2022, Pages 144-152]
  • Numerical modeling Influence of Up-down-up Constitutive Equation Parameters on ‎Yield Plateau Stage of Mild Steel Samples Subjected to Stretching [Volume 8, Issue 4, 2022, Pages 1315-1323]
  • Numerical simulation Numerical Investigation of Enhanced Oil Recovery from various ‎Rocks by Nanosuspensions Flooding [Volume 8, Issue 1, 2022, Pages 306-318]
  • Numerical simulation The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
  • Numerical simulation Experimental Study and Identification of a Dynamic ‎Deformation Model of Dry Clay at Strain Rates up to 2500 s-1‎ [Volume 8, Issue 3, 2022, Pages 981-995]
  • Numerical simulations Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]
  • Numerical solution Investigation of Jeffery-Hamel Flow for Nanofluid in the Presence of Magnetic Field by a New Approach in the Optimal Homotopy Analysis Method [Volume 8, Issue 1, 2022, Pages 48-59]
  • NURBS Generation of a Quadrilateral Mesh based on NURBS for Gyroids ‎of Variable Thickness and Porosity [Volume 8, Issue 2, 2022, Pages 684-698]
  • Nusselt Number‎ Mixed Convection Heat Transfer and Entropy Generation in a ‎Water-filled Square Cavity Partially Heated from Below: The ‎Effects of Richardson and Prandtl Numbers [Volume 8, Issue 1, 2022, Pages 282-297]

O

  • Oblique magnetic field Non-similar Radiative Bioconvection Nanofluid Flow under ‎Oblique Magnetic Field with Entropy Generation‎ [Volume 8, Issue 1, 2022, Pages 206-218]
  • Operating room (OR)‎ Optimization of Air Distribution Patterns by Arrangements of ‎Air Inlets and Outlets: Case Study of an Operating Room [Volume 8, Issue 3, 2022, Pages 809-830]
  • Optimal Homotopy Analysis Method Investigation of Jeffery-Hamel Flow for Nanofluid in the Presence of Magnetic Field by a New Approach in the Optimal Homotopy Analysis Method [Volume 8, Issue 1, 2022, Pages 48-59]
  • Optimisation Multi-objective Optimal Design of Carbon and Glass Reinforced ‎Hybrid Composites under Flexural Loading [Volume 8, Issue 4, 2022, Pages 1324-1331]
  • Orthogonal collocation method Direct Transcription Approach to Dynamic Optimization Problems in Engineering [Volume 8, Issue 2, 2022, Pages 605-616]
  • Oscillating blade Thermal Performance of Oscillating Blade with Various ‎Geometries in a Straight Channel [Volume 8, Issue 1, 2022, Pages 114-128]

P

  • Parametric mesh Generation of a Quadrilateral Mesh based on NURBS for Gyroids ‎of Variable Thickness and Porosity [Volume 8, Issue 2, 2022, Pages 684-698]
  • Particle size distribution Studying the Strengthening Effect of Railway Ballast in the ‎Direct Shear Test due to Insertion of Middle-size Ballast Particles [Volume 8, Issue 4, 2022, Pages 1387-1397]
  • Particulate filter model Prediction Capabilities of a One-dimensional Wall-flow ‎Particulate Filter Model [Volume 8, Issue 1, 2022, Pages 245-259]
  • Performance comparison A Comparative Study on the Efficiency of Compiled Languages ‎and MATLAB/Simulink for Simulation of Highly Nonlinear ‎Automotive Systems [Volume 8, Issue 3, 2022, Pages 853-864]
  • Periodic ‎loading Effects of Periodic Loading on Longitudinal Fracture in ‎Viscoelastic Functionally Graded Beam Structures‎ [Volume 8, Issue 1, 2022, Pages 370-378]
  • Permeability Mathematical Analysis of Poiseuille Flow of Casson Fluid past Porous Medium [Volume 8, Issue 2, 2022, Pages 456-474]
  • Permeability Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
  • Permeability Algorithm for Determining the Permeability and Compaction ‎Properties of a Gas Condensate Reservoir based on a Binary Model [Volume 8, Issue 3, 2022, Pages 1014-1022]
  • Permeable surface Heat Transfer of Hybrid-nanofluids Flow Past a Permeable Flat Surface with Different Volume Fractions [Volume 8, Issue 1, 2022, Pages 21-35]
  • Perturbed motion Rotations of a Rigid Body Close to the Lagrange Case under the ‎Action of Nonstationary Perturbation Torque [Volume 8, Issue 3, 2022, Pages 1023-1031]
  • Piezoelectric layers Distributed-parameter Dynamic Modeling and Bifurcation Analysis of a Trapezoidal Piezomagnetoelastic Energy Harvester [Volume 8, Issue 1, 2022, Pages 97-113]
  • Piezoelectric material Effect of Porosity and Hygrothermal Environment on FGP ‎Hollow Spheres under Electromechanical Loads [Volume 8, Issue 2, 2022, Pages 710-722]
  • Piezoelectric Nanoplate Buckling and Vibration Analysis of a Double-layer Graphene ‎Sheet Coupled with a Piezoelectric Nanoplate [Volume 8, Issue 1, 2022, Pages 129-143]
  • PIV An Experimental Comparison between Wing Root and Wingtip ‎Corrugation Patterns of Dragonfly Wing at Ultra-low Reynolds ‎Number and High Angles of Attack‎ [Volume 8, Issue 4, 2022, Pages 1176-1185]
  • Plane stress problem Free Vibration Analysis of 2D Functionally Graded Strip Beam using Finite ‎Element Method‎ [Volume 8, Issue 4, 2022, Pages 1422-1430]
  • Poiseuille flow in channel/pipe Mathematical Analysis of Poiseuille Flow of Casson Fluid past Porous Medium [Volume 8, Issue 2, 2022, Pages 456-474]
  • Pores distribution Mathematical Analysis of Poiseuille Flow of Casson Fluid past Porous Medium [Volume 8, Issue 2, 2022, Pages 456-474]
  • Poroelastic half-space Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
  • Porosity Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
  • Porosity Effect of Porosity and Hygrothermal Environment on FGP ‎Hollow Spheres under Electromechanical Loads [Volume 8, Issue 2, 2022, Pages 710-722]
  • Porosity Analysis of a Hyperbolic Heat Transfer Model in Blood-perfused ‎Biological Tissues with Laser Heating [Volume 8, Issue 4, 2022, Pages 1398-1406]
  • Porous media Numerical Simulation of Unsteady Flow toward a Stretching/Shrinking Sheet in Porous Medium Filled with a Hybrid Nanofluid [Volume 8, Issue 1, 2022, Pages 11-20]
  • Porous media Numerical Solution of the Time Fractional Reaction-advection-diffusion Equation in Porous Media [Volume 8, Issue 1, 2022, Pages 84-96]
  • Porous media Prediction Capabilities of a One-dimensional Wall-flow ‎Particulate Filter Model [Volume 8, Issue 1, 2022, Pages 245-259]
  • Porous medium Mathematical Analysis of Poiseuille Flow of Casson Fluid past Porous Medium [Volume 8, Issue 2, 2022, Pages 456-474]
  • Porous medium Metal and Metallic Oxide Nanofluid over a Shrinking Surface with ‎Thermal Radiation and Heat Generation/Absorption [Volume 8, Issue 2, 2022, Pages 557-565]
  • Porous medium Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
  • Porous medium Magneto Casson-Carreau Fluid Flow through a Circular Porous ‎Cylinder with Partial Slip‎ [Volume 8, Issue 4, 2022, Pages 1208-1221]
  • Power Impact-enhanced Electrostatic Vibration Energy Harvester [Volume 8, Issue 2, 2022, Pages 671-683]
  • Prandtl number Mixed Convection Heat Transfer and Entropy Generation in a ‎Water-filled Square Cavity Partially Heated from Below: The ‎Effects of Richardson and Prandtl Numbers [Volume 8, Issue 1, 2022, Pages 282-297]
  • Primary Resonance Nonlinear Primary Frequency Response Analysis of Self-‎Sustaining Nanobeam Considering Surface Elasticity [Volume 8, Issue 4, 2022, Pages 1196-1207]
  • Profile Optimization Twin Screw Expanders Profile Optimization Using Surrogate-‎Based Modelling [Volume 8, Issue 4, 2022, Pages 1141-1153]
  • PTO Proportional Topology Optimization under ‎Reliability-based Constraints [Volume 8, Issue 1, 2022, Pages 319-330]
  • Pull-in instability Pull-in Phenomenon in the Electrostatically Micro-switch ‎Suspended between Two Conductive Plates using the Artificial ‎Neural Network [Volume 8, Issue 4, 2022, Pages 1222-1235]
  • Pull-in instability Pull-in Instability Analysis of a Nanocantilever Based on the ‎Two-Phase Nonlocal Theory of Elasticity [Volume 8, Issue 4, 2022, Pages 1456-1466]
  • Pull-Off Experimental and Finite Element Study to Determine the ‎Mechanical Properties and Bond Between Repair Mortars and ‎Concrete Substrates [Volume 8, Issue 2, 2022, Pages 493-509]

Q

  • Quasilinearization Effect of Cattaneo-Christov Heat Flux on Radiative ‎Hydromagnetic Nanofluid Flow between Parallel Plates using ‎Spectral Quasilinearization Method [Volume 8, Issue 3, 2022, Pages 865-875]

R

  • RANS Model Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
  • Recursive method Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]
  • Reduction in space Reduction in Space for Dynamic Finite Element Analysis of Assemblies of Beam-columns when the Mass is Available in Digitized Format [Volume 8, Issue 1, 2022, Pages 71-83]
  • Reiner–Philippoff fluid Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
  • Reinforced composite beam Application of Newmark Average Acceleration and Ritz Methods ‎on Dynamical Analysis of Composite Beams under a Moving Load [Volume 8, Issue 2, 2022, Pages 764-773]
  • Relaxation time Analysis of a Hyperbolic Heat Transfer Model in Blood-perfused ‎Biological Tissues with Laser Heating [Volume 8, Issue 4, 2022, Pages 1398-1406]
  • Relevance Vector Machine A Hybrid SVM-RVM Algorithm to Mechanical Properties in the Friction Stir Welding Process [Volume 8, Issue 1, 2022, Pages 36-47]
  • Reliability analysis Proportional Topology Optimization under ‎Reliability-based Constraints [Volume 8, Issue 1, 2022, Pages 319-330]
  • Repair Mortar Experimental and Finite Element Study to Determine the ‎Mechanical Properties and Bond Between Repair Mortars and ‎Concrete Substrates [Volume 8, Issue 2, 2022, Pages 493-509]
  • Residual stresses Multi-objective Optimization of Shot-peening Parameters using ‎Design of Experiments and Finite Element Simulation: A ‎Statistical Model [Volume 8, Issue 3, 2022, Pages 838-852]
  • Resonance Frequency Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests [Volume 8, Issue 2, 2022, Pages 438-447]
  • Retardation time Polymeric Dissipative Convection Flow from an Inclined Plane with Chemical Reaction: Numerical Study [Volume 8, Issue 2, 2022, Pages 416-428]
  • Richardson number Mixed Convection Heat Transfer and Entropy Generation in a ‎Water-filled Square Cavity Partially Heated from Below: The ‎Effects of Richardson and Prandtl Numbers [Volume 8, Issue 1, 2022, Pages 282-297]
  • Rigid body Rotations of a Rigid Body Close to the Lagrange Case under the ‎Action of Nonstationary Perturbation Torque [Volume 8, Issue 3, 2022, Pages 1023-1031]
  • Ritz method Strength of Steel Shell Cylindrical Panels Reinforced with an ‎Orthogonal Grid of Stiffeners [Volume 8, Issue 2, 2022, Pages 723-732]
  • Ritz method‎ Application of Newmark Average Acceleration and Ritz Methods ‎on Dynamical Analysis of Composite Beams under a Moving Load [Volume 8, Issue 2, 2022, Pages 764-773]
  • Roughness Multi-objective Optimization of Shot-peening Parameters using ‎Design of Experiments and Finite Element Simulation: A ‎Statistical Model [Volume 8, Issue 3, 2022, Pages 838-852]
  • Runge-Kutta method‎ Free Convection of Micropolar Fluid over an Infinite Inclined ‎Moving Porous Plate [Volume 8, Issue 4, 2022, Pages 1154-1162]

S

  • Scattering Investigation on the Crack Effect in the Cylinder and Matrix on the Backscattering Field Frequency Specifications using the Finite Element Method [Volume 8, Issue 2, 2022, Pages 448-455]
  • Second-order boundary-value problems Numerical Scheme based on Non-polynomial Spline Functions for ‎the System of Second Order Boundary Value Problems arising in ‎Various Engineering Applications [Volume 8, Issue 1, 2022, Pages 144-152]
  • Seismic wave transmission Scattering and Backscattering Study of Mechanical Plane Wave in Composite Materials Plates (Earth model 1066B and LiNbO3) [Volume 8, Issue 2, 2022, Pages 518-527]
  • Self-priming pumps Finite Elements Analysis of the Hyperelastic Impeller Rotating in ‎the Self-Priming Pump [Volume 8, Issue 3, 2022, Pages 1103-1112]
  • Self-Sustaining Nanobeam Nonlinear Primary Frequency Response Analysis of Self-‎Sustaining Nanobeam Considering Surface Elasticity [Volume 8, Issue 4, 2022, Pages 1196-1207]
  • Semi-analytical solution‎ Effect of Porosity and Hygrothermal Environment on FGP ‎Hollow Spheres under Electromechanical Loads [Volume 8, Issue 2, 2022, Pages 710-722]
  • Separated and non-separated boundary conditions Haar Wavelet Method for Solving High-Order Differential Equations with Multi-Point Boundary Conditions [Volume 8, Issue 2, 2022, Pages 528-544]
  • Separating point Analytical Solutions and Analyses of the Displacement ‎Separating Point in Diffusers [Volume 8, Issue 3, 2022, Pages 891-903]
  • Shear model Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
  • Shear Stress Elastic Limit Angular Velocity and Acceleration Investigation in Non-‎Uniform Rotating Disk under Time-Dependent Mechanical Loading [Volume 8, Issue 3, 2022, Pages 791-808]
  • Shear-to-strain- rate Numerical Study of Three-dimensional Boundary-layer Flow over ‎a Wedge: Magnetic Field Analysis [Volume 8, Issue 3, 2022, Pages 876-890]
  • Shells Strength of Steel Shell Cylindrical Panels Reinforced with an ‎Orthogonal Grid of Stiffeners [Volume 8, Issue 2, 2022, Pages 723-732]
  • Shot-peening Multi-objective Optimization of Shot-peening Parameters using ‎Design of Experiments and Finite Element Simulation: A ‎Statistical Model [Volume 8, Issue 3, 2022, Pages 838-852]
  • Shrinkage Experimental and Finite Element Study to Determine the ‎Mechanical Properties and Bond Between Repair Mortars and ‎Concrete Substrates [Volume 8, Issue 2, 2022, Pages 493-509]
  • Shrinking sheet Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
  • Simulation Reducing the Wear of the UHMWPE Used in the Total Hip ‎Replacement after Low-Pressure Plasma Treatment [Volume 8, Issue 3, 2022, Pages 1035-1042]
  • Simulink A Comparative Study on the Efficiency of Compiled Languages ‎and MATLAB/Simulink for Simulation of Highly Nonlinear ‎Automotive Systems [Volume 8, Issue 3, 2022, Pages 853-864]
  • Sinusoidal Shear Deformation Theory Buckling and Vibration Analysis of a Double-layer Graphene ‎Sheet Coupled with a Piezoelectric Nanoplate [Volume 8, Issue 1, 2022, Pages 129-143]
  • Sliding mode Chaos Control in Gear Transmission System using GPC and SMC ‎Controllers [Volume 8, Issue 2, 2022, Pages 545-556]
  • SMC Chaos Control in Gear Transmission System using GPC and SMC ‎Controllers [Volume 8, Issue 2, 2022, Pages 545-556]
  • Sodium alginate Thermal Analysis of Radiating Film Flow of Sodium Alginate ‎using MWCNT Nanoparticles ‎ [Volume 8, Issue 1, 2022, Pages 219-231]
  • Soft tissue modeling Characterization of the Nonlinear Biaxial Mechanical Behavior ‎of Human Ureter using Constitutive Modeling and Artificial ‎Neural Networks [Volume 8, Issue 4, 2022, Pages 1186-1195]
  • Solar finned and baffled heat exchangers Hydrodynamic Behavior in Solar Oil Heat Exchanger Ducts Fitted ‎with Staggered Baffles and Fins [Volume 8, Issue 3, 2022, Pages 774-790]
  • Soret and Dufour effects MHD Non-Newtonian Fluid Flow past a Stretching Sheet under ‎the Influence of Non-linear Radiation and Viscous Dissipation [Volume 8, Issue 3, 2022, Pages 949-961]
  • Soret effect Theoretical Investigation of Viscosity and Thermal Conductivity ‎of a Gas along a Non-isothermal Vertical Surface in Porous ‎Environment with Dissipative Heat: Numerical Technique [Volume 8, Issue 4, 2022, Pages 1236-1245]
  • Spectral invariants Finite Deformations of Fibre-reinforced Elastic Solids with ‎Fibre Bending Stiffness: A Spectral Approach [Volume 8, Issue 4, 2022, Pages 1332-1342]
  • Stability analysis Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
  • Stability analysis‎ Numerical Investigations of the Coupled Nonlinear Non-homogeneous Partial Differential Equations [Volume 8, Issue 3, 2022, Pages 1054-1064]
  • Straight-wall Analytical Solutions and Analyses of the Displacement ‎Separating Point in Diffusers [Volume 8, Issue 3, 2022, Pages 891-903]
  • Sub-diffusion Numerical Solution of the Time Fractional Reaction-advection-diffusion Equation in Porous Media [Volume 8, Issue 1, 2022, Pages 84-96]
  • Support vector machine A Hybrid SVM-RVM Algorithm to Mechanical Properties in the Friction Stir Welding Process [Volume 8, Issue 1, 2022, Pages 36-47]
  • Surface Elasticity Nonlinear Primary Frequency Response Analysis of Self-‎Sustaining Nanobeam Considering Surface Elasticity [Volume 8, Issue 4, 2022, Pages 1196-1207]
  • Surrogate-Based Modeling Twin Screw Expanders Profile Optimization Using Surrogate-‎Based Modelling [Volume 8, Issue 4, 2022, Pages 1141-1153]

T

  • Thermal analysis Combined Impacts of Fin Surface Inclination and ‎Magnetohydrodynamics on the Thermal Performance of a Convective-Radiative Porous Fin‎ [Volume 8, Issue 3, 2022, Pages 940-948]
  • Thermal comfort Heating Capacity of an Earth to Air Heat Exchanger in Arid Regions - Experimental Investigation [Volume 8, Issue 2, 2022, Pages 429-437]
  • Thermal conductivity A New Modified Hamilton-Crosser and Nan Models for Thermal ‎Conductivity of Different Lengths Carbon Nanotubes Water-‎based Nanofluids [Volume 8, Issue 3, 2022, Pages 831-837]
  • Thermal Performance‎ Combined Impacts of Fin Surface Inclination and ‎Magnetohydrodynamics on the Thermal Performance of a Convective-Radiative Porous Fin‎ [Volume 8, Issue 3, 2022, Pages 940-948]
  • Thermal radiation Metal and Metallic Oxide Nanofluid over a Shrinking Surface with ‎Thermal Radiation and Heat Generation/Absorption [Volume 8, Issue 2, 2022, Pages 557-565]
  • Thermal radiation Theoretical Investigation of Viscosity and Thermal Conductivity ‎of a Gas along a Non-isothermal Vertical Surface in Porous ‎Environment with Dissipative Heat: Numerical Technique [Volume 8, Issue 4, 2022, Pages 1236-1245]
  • Thermal radiation Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
  • Thermoelasticity Thermal Diffusion Responses in an Infinite Medium with a ‎Spherical Cavity using the Atangana-Baleanu Fractional ‎Operator [Volume 8, Issue 4, 2022, Pages 1358-1369]
  • Thermomechanical stresses Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]
  • Three-dimensional flow Numerical Study of Three-dimensional Boundary-layer Flow over ‎a Wedge: Magnetic Field Analysis [Volume 8, Issue 3, 2022, Pages 876-890]
  • Time-dependent loading Elastic Limit Angular Velocity and Acceleration Investigation in Non-‎Uniform Rotating Disk under Time-Dependent Mechanical Loading [Volume 8, Issue 3, 2022, Pages 791-808]
  • Time series Refined Cross-sample Entropy based on Freedman-Diaconis Rule: ‎Application to Foreign Exchange Time Series [Volume 8, Issue 3, 2022, Pages 1005-1013]
  • Timoshenko beam An Analysis of Nonlinear Beam Vibrations with the Extended ‎Rayleigh-Ritz Method [Volume 8, Issue 4, 2022, Pages 1299-1306]
  • Topology Optimization Topology Optimization of Laminated Composite Plates and Shells using Optimality Criteria [Volume 8, Issue 2, 2022, Pages 405-415]
  • Torque Rotations of a Rigid Body Close to the Lagrange Case under the ‎Action of Nonstationary Perturbation Torque [Volume 8, Issue 3, 2022, Pages 1023-1031]
  • Torsion Finite Deformations of Fibre-reinforced Elastic Solids with ‎Fibre Bending Stiffness: A Spectral Approach [Volume 8, Issue 4, 2022, Pages 1332-1342]
  • TPMS Generation of a Quadrilateral Mesh based on NURBS for Gyroids ‎of Variable Thickness and Porosity [Volume 8, Issue 2, 2022, Pages 684-698]
  • Transient response Transient Response of Longitudinal Fins under Step Changes in ‎Base Temperature and Heat Flux using Lattice Boltzmann ‎Method [Volume 8, Issue 3, 2022, Pages 925-939]
  • Trapezoidal beam Distributed-parameter Dynamic Modeling and Bifurcation Analysis of a Trapezoidal Piezomagnetoelastic Energy Harvester [Volume 8, Issue 1, 2022, Pages 97-113]
  • Tri Hybrid Nanofluid Theoretical Study of Convective Heat Transfer in Ternary ‎Nanofluid Flowing past a Stretching Sheet [Volume 8, Issue 4, 2022, Pages 1279-1286]
  • Turbulent boundary layer Analytical Solutions and Analyses of the Displacement ‎Separating Point in Diffusers [Volume 8, Issue 3, 2022, Pages 891-903]
  • Twin Screw Expander Twin Screw Expanders Profile Optimization Using Surrogate-‎Based Modelling [Volume 8, Issue 4, 2022, Pages 1141-1153]
  • Two-carrier planetary gear train Research into the Properties of Selected Single Speed Two-Carrier ‎Planetary Gear Trains [Volume 8, Issue 2, 2022, Pages 699-709]
  • Two-dimensional stagnation point Numerical Simulation of Unsteady Flow toward a Stretching/Shrinking Sheet in Porous Medium Filled with a Hybrid Nanofluid [Volume 8, Issue 1, 2022, Pages 11-20]
  • Two-layer SWEs A Kinetic Flux-vector Splitting Scheme for Two-layer Shallow Flow Model [Volume 8, Issue 3, 2022, Pages 1043-1053]
  • Two-scale vibration A Brief Review on the Asymptotic Methods for the Periodic ‎Behaviour of Microelectromechanical Systems [Volume 8, Issue 3, 2022, Pages 1120-1140]
  • Two-wheeled vehicles On the Analytical and Computational Methodologies for Modelling Two-wheeled Vehicles within the Multibody Dynamics Framework: A Systematic Literature Review [Volume 8, Issue 1, 2022, Pages 153-181]

U

  • UHMWPE Reducing the Wear of the UHMWPE Used in the Total Hip ‎Replacement after Low-Pressure Plasma Treatment [Volume 8, Issue 3, 2022, Pages 1035-1042]
  • Ultra-low Reynolds An Experimental Comparison between Wing Root and Wingtip ‎Corrugation Patterns of Dragonfly Wing at Ultra-low Reynolds ‎Number and High Angles of Attack‎ [Volume 8, Issue 4, 2022, Pages 1176-1185]
  • Ultrasonic Investigation on the Crack Effect in the Cylinder and Matrix on the Backscattering Field Frequency Specifications using the Finite Element Method [Volume 8, Issue 2, 2022, Pages 448-455]
  • Ultrasonic Horn-Tool Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests [Volume 8, Issue 2, 2022, Pages 438-447]
  • Underground hydrogen storage Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]
  • Ureter Characterization of the Nonlinear Biaxial Mechanical Behavior ‎of Human Ureter using Constitutive Modeling and Artificial ‎Neural Networks [Volume 8, Issue 4, 2022, Pages 1186-1195]

V

  • Variational method Variational Derivation of Truncated Timoshenko-Ehrenfest Beam Theory [Volume 8, Issue 3, 2022, Pages 996-1004]
  • Virtual displacement principle Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
  • Viscoelastic beam Effects of Periodic Loading on Longitudinal Fracture in ‎Viscoelastic Functionally Graded Beam Structures‎ [Volume 8, Issue 1, 2022, Pages 370-378]
  • Viscoelastic fluid Polymeric Dissipative Convection Flow from an Inclined Plane with Chemical Reaction: Numerical Study [Volume 8, Issue 2, 2022, Pages 416-428]
  • Viscoelastic Medium Nonlinear Primary Frequency Response Analysis of Self-‎Sustaining Nanobeam Considering Surface Elasticity [Volume 8, Issue 4, 2022, Pages 1196-1207]
  • Viscous dissipation Polymeric Dissipative Convection Flow from an Inclined Plane with Chemical Reaction: Numerical Study [Volume 8, Issue 2, 2022, Pages 416-428]
  • Viscous dissipation MHD Non-Newtonian Fluid Flow past a Stretching Sheet under ‎the Influence of Non-linear Radiation and Viscous Dissipation [Volume 8, Issue 3, 2022, Pages 949-961]
  • VOF method Numerical Investigation of Enhanced Oil Recovery from various ‎Rocks by Nanosuspensions Flooding [Volume 8, Issue 1, 2022, Pages 306-318]
  • Vortex shedding‎ Thermal Performance of Oscillating Blade with Various ‎Geometries in a Straight Channel [Volume 8, Issue 1, 2022, Pages 114-128]

W

  • Warm Stamping Neural Networks with Input Dimensionality Reduction for ‎Efficient Temperature Distribution Prediction in a Warm ‎Stamping Process [Volume 8, Issue 4, 2022, Pages 1431-1444]
  • Warping Computational Enhancement of a Mixed 3D Beam Finite Element with Warping and Damage [Volume 8, Issue 1, 2022, Pages 260-281]
  • Water-based nanofluid flows Magnetized Bi-convective Nanofluid Flow and Entropy ‎Production Using Temperature-sensitive Base Fluid Properties:‎ A Unique Approach [Volume 8, Issue 4, 2022, Pages 1163-1175]
  • Wave barriers A Simplified Analytical Method for Detuning Periodic Pile Barriers [Volume 8, Issue 4, 2022, Pages 1480-1487]
  • Wedge flow Numerical Study of Three-dimensional Boundary-layer Flow over ‎a Wedge: Magnetic Field Analysis [Volume 8, Issue 3, 2022, Pages 876-890]
  • Wedge/stagnation point‎ Stability Analysis of Casson Nanofluid Flow over an Extending/Contracting ‎Wedge and Stagnation Point [Volume 8, Issue 2, 2022, Pages 566-579]

Y

  • Yield stress The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
  • Y-junction Flow Regimes Characteristics of Water-crude Oil in a Rectangular ‎Y-microchannel [Volume 8, Issue 2, 2022, Pages 655-670]